Detailed Product Description

Stainless steel shot/ stainless steel cut wire shot

A shot blasting media for the cleaning, deburring & surface improvement of various casting types. It is most typically used on Aluminium, Non Ferrous Metals, Zinc Alloys, Stainless Steel etc. where a rust & stain free surface is required on the finished casting.

Metal Parts where a special finish is required.

Investment castings,small Aluminium castings & Forgings

Aluminum Wheels, Pistons, Casings & Forgings

Aluminium, Copper, Non Ferrous Alloys, Zinc & Forgings

Aluminium castings, Special Alloys & Forgings

Stainless Steel Castings & Forgings

     Adopting the Drawing into wire, cutting, grinding into roundness and other procedures to make.  The surface is bright, no rust, round dew form (cutting shot, column form).  It extensive applied in the surface of treatment of shot blasting, such as Cu, Al, Zn and Stainless steel shot etc..  it can make the surface of work piece finishing afer processed, extend metal substance and dont rust, however, neednt acid washing and the wear-resistance is 3-5 multiple to casting steel shot,.  Certainly, it can reduce product manufacturer cost.

Main chemistry: SUS, 304  C: 0.08%  Mn: 0.9%  Cr:18%  Ni:9%  Si < 1%

              SUS 302  C:0.08%   Mn:V0.9%  Cr:17%  Ni:4-6%

              SUS, 430  C: 0.10%  Mn < 1.2%  Cr :15-16%

              SUS 410   C:0.1%  Mn:1.2% Cr:13%

Density: Round shot 7.9g/cucm;     Cutting wire shot: 7.8g/cucm

Size:0.2mm-1.5mm   we can customize other size product             

Hardness:400-600HV